Physics Investigatory Project On Logic Gates For Class 12 Pdf Download |work| Info

Two diodes are connected in parallel. If any input is high, the diode conducts, and the LED glows. 0+0=0, 0+1=1, 1+0=1, 1+1=1. B. AND Gate (Using Diodes)

Observe the LED (Output). If the LED glows, the output is 1; if not, it is 0. Record the observations in a Truth Table for each gate. 7. Observations & Results Two diodes are connected in parallel

Check the polarity of the diodes and transistors before powering on. How to Download this Project as a PDF Record the observations in a Truth Table for each gate

Using a transistor in common-emitter configuration. When the input is high, the transistor saturates and shorts the LED to the ground (LED OFF). 1=0, 0=1. 6. Procedure NOT) and combination gates (NAND

Digital signals are represented by two states: and Low (0) . AND Gate: Output is 1 only if all inputs are 1. OR Gate: Output is 1 if at least one input is 1. NOT Gate: It inverts the input (Inverter).

Physics Investigatory Project: Design and Simulation of Logic Gates 1. Introduction

To design and study the truth tables of basic logic gates (OR, AND, NOT) and combination gates (NAND, NOR) using diodes, transistors, and integrated circuits (ICs).